What LED tail lights should you choose and why?

Regarding tail lights, there are two choices available to you.

Option 1: Swap out the old bulbs for new ones using your stock tail lights. Alternatively, option 2 is to replace them entirely with an LED light setup.

To make your truck lights better, just take off the old ones and put on new ones. This will improve your parking, brake, turn, and reverse lights.

New tail lights look better, are brighter, easy to install, and usually don't need any changes to your car. For instance, the big C-shaped tail light from LedLightJeep has side markers, parking lights, brake lights, and reverse lights. You need to remove and replace the plug; the wiring harness on the rear of these will have the same connector as your original tail lights.

After removing the old tail lights and installing the new ones—which plug right in—you leave. That's how simple it is. You now have brighter, better tail lights.

Aftermarket tail lights for other cars can do more than just look good. They can also have features like a sequential rear turn signal.

Now, I will introduce you to the Huge C tail light, which many Jeepers worldwide have found to be quite beneficial.

Huge C LED Tail Light - The BEST Jeep JK LED tail Lights

These LED lights will make your JL look complete and resemble a JT more than a JL. The King Kong Headlights also match the JL aesthetic. Since the gladiators have a light ring resembling a C, they also have it.

The lighting setup includes brake lights on top and bottom, along with LED running lights around the taillight. Additionally, the central bar houses the reverse lights.

If they start to get wet, there are two breather vents and some cooling fins on the rear. DOTS has approved these taillights, and they won't blink rapidly like some jeeps because they have an anti-flicker harness.

Some facts about the Huge C LED tail light：

• Durable black ABS housing, clear PMMA lens.
• Breathing hole design to avoid moisture.
• 20W high power reversing light, Waterproof IP67.
• Built-in EMC, easy installation plug and play.
• Compatible with Jeep Wrangler JK JKU 2007-2018.
• Choose the right version for your Jeep from the USA or EURO options available for each country.

Installing Led truck tail lights is super simple.

All you'll need is a screwdriver or a drill with a Phillips head bit; either will do.

There are four screws on the stock tail light, one on each corner. Additionally, to release the OEM tail light, you'll need to remove the two closest to the middle of the Jeep. And finally, to fully liberate the tail light. Pressing the Jeep toward its center and then pulling straight out is best.

To remove the light gray harness, first take out the dark gray harness from the tail light in the Jeep. Press the release tab to detach the light gray harness.

After removing the light gray harness, reinstall the dark gray harness. Then, reinstall the dark gray harness. Next, the new taillights will be put in place.

Suppose you need clarification on which side belongs where. Recall that the wire harness is always located at the bottom. And with that, you ought to be able to work it out.

After plugging in the new tail light, you only need to slide the headlights back in. Push them flush against the Jeep before pushing out to lock them in place. All that's left to do is use your two factory screws to reinstall the tail light.

You now have new tail lights fitted on both sides. Although it looks perfect, the side is quite bright, making it difficult to see any LED lights.

The stock light only sparked weakly at around 20 feet from the wall. The enormous C tail lights are far brighter than the stock light and shine nearly up the wall.

You can now depend on the brake light if the spare tire covers almost all your third brake light. You can tell the difference between breaking and having your headlight on with the new headlight. 

Conclusion

LED lighting has numerous benefits over conventional incandescent lighting.

Brighter LEDs that illuminate instantly upon current passage produce faster and more conspicuous tail lights. One excellent place to start when it comes to driving safely is to install LEDs in your car.

LEDs are robust and have a longer lifespan. LEDs can last longer because there isn't any heat or filament to break. All you have to do is install them, and you'll be able to enjoy years of constant quality.

Visit us here for the world's most fantastic range of LED car lights. 

LED illumination is an upgrade from your Jeep Wrangler's factory lights, so you shouldn't ignore your tail lights.

Visit us for high-quality LED lights for your Jeep, Harley, ATVs, and UTVs. We have LED turn signals, tail lights, fog lights, and headlights available.