Menu
Your Cart
TODAY ONLY!!! Take an additional 5% OFF. HURRY! Use Discount Code: TODAY

Harley LED Headlight

MOTORCYCLE LED LIGHTS INSTALLATION GUIDE

Work on Your Bike Like a Pro

Steve, the resident expert and service technician at LedLightJeep, shows you how to install the new LED headlight. These LED lights are designed for Road Glide bikes model 15 and newer. They are attractive and improve safety and enjoyment while riding.

These motorbike LED lights are waterproof, durable, and one-piece sealed. On low, they emit 4,000 lumens; on high, they produce an incredible 8,000 lumens. They are entirely legal and have DOT approval.

The LED headlamp is modern and easy to install. Anyone can do it by simply plugging it in.

Get Everything Ready for Harley Led Headlight Installation

Upon initially opening your LED headlamp, confirm that every component is there. The kit includes everything you need to install the headlamp, such as the wire harness, brackets, screws, and adhesive thread locker. You probably already have a couple of the tools you need. 

Ensure your existing headlight and turn signal wiring functions correctly before disassembling the components. Examine your hazards, left and right turn signals, and low and high beams.

When testing the new headlamp, you should record which ones are broken. Hopefully, if there is a problem, it's only a burned-out bulb. However, at this point, you'll know the issue is with your bike and not the new headlamp if anything isn't working now and doesn't work on your new headlight. 

Remove the Outer Fairing

The first step is to pull the outer fairing off. This may seem like a big deal, but it's pretty straightforward. There are also lots of videos on YouTube that show you how this is done.

Before you get started, we recommend using a hand-held screwdriver, not a powered one. This allows you greater control, so you don't accidentally scratch the fairing or worse. It's always a good idea to cover your fender with a mover blanket before you start to protect it from the fairing or if you drop something.

Follow these steps in order:

We recommend just loosening the speaker bolts without removing them. This will help keep the fairing from falling on your front fender and potentially damaging it.

To remove the cover of the speaker, keep the bolts on. Stand in front of your bike and lean over the cover. Unscrew it by hand and remove it easily because it's not heavy.  

Once the fairing is off there, there are four bolts to remove to get the headlight assembly out. There are two bolts at the top to the left and right of the assembly, then two lower bolts just below the assembly. Feel free to move to a power drill if you like for these, but always be careful.

Remember the last bolt holds the assembly in place, so keep one hand on the headlight as you remove the last bolt. (You may or may not have screens on each side of the headlight assembly, but remove these now.) Pull the headlight out enough to get to the wire harness clip behind the headlight. Lift the clip to release the headlight.

Preparing the Harley Davidson LED headlight for installation.

To avoid scratching anything, we advise working on the headlamp while using a moving blanket for the following procedures.

You need to install filler panels on both sides of the old headlamp you just removed to install the LED headlight. There are some distinctions, though. The bolt and brass grommet on the lower back of the OEM headlight, which connects the panels to the headlight, are easily noticeable.

You no longer have the bolt/grommet on your new headlight. A bolt, nut, washer, and Loctite are included to secure the panels onto the new headlamp. Before moving on to the next step, ensure the filler panels on your new headlamp.

The standard headlight is significantly thicker than the new one. It fits the original mounting bolt location thanks to two brackets that extend the headlight. Three bolts are included with each bracket, which you fasten with Loctite.

Installing the Harley-Davidson Headlight Led

Install splitters on the new headlamp first. With these spade connectors, You may link your bike's headlight to the side turn signals. What goes where is relatively straightforward.

Verify that the rubber on the splitter is slipped up and over the other rubber. It's now time to plug in the headlamp.

After that, attach the new headlight to the bike's connector. This one was the last connector to be unplugged to remove the old headlamp.

Reinstall all of your wiring after pulling it up over the headlight. After inserting the top two bolts but not ultimately tightening them, proceed to insert the lower bolts. This is the moment to reinstall any side screens that you may have.

Make sure you twist every bolt carefully between 22 and 32 inch pounds. If you have a torque wrench, that's the most excellent tool. If you're doing it by hand, use a standard hand-driven screwdriver. The bolts should be tightened, but not to break teeth.

Bring the cables with the splitters up to the side blinkers and daisy chain them in. NOTE: When you reinstall the fairing, there will still be a female splitter where the turn signals attach.

Testing your Harley Davidson LED Headlight

It's time to check that everything is linked correctly before replacing the fairing. Check the hazards, left and right turn signals, high and low beams, and ignition.

It's time to replace the fairing after ensuring everything operates as it should. At this point, people most frequently make the mistake of reversing the wiring, causing the left to activate the right and vice versa.

Exchange the spade connections. The first thing you should do if any lights aren't working is check your wiring connections twice. If the problem persists after replacing the headlight, the issue is likely with the bike itself and not the headlamp. This means that the problem is not with the headlight, but with another part of the bike.

You will replace the fairing after making sure every light is operational. Remember, don't link the ffairing'sturn signals to the last remaining splitter. Make sure it's functioning by checking the light and pressing it until it clicks. Next, reinstall the fairing bolts in the opposite order you removed them.

Take a step back now and inspect your newly installed LED headlights. Yes, it is fierce. Come with me for a ride!

Model: 10212
New Dual LED Headlight, high brightness illuminates the oncoming road glide headlight. Key Feature:Superior materials: The clear PC lens and the black die-cast aluminum housing guarantee that the Dual LED Headlight is waterproof, rust-proof, shock-proof, and explosion-proof, so ..
$289.99 $289.99
2'' 1157 dual contact front led turn signal with drl & rear red led brake lights with red turn signals 2'' 1157 dual contact front led turn signal with drl & rear red led brake lights with red turn signals
-25 %
Model: 10190
Features: Higher-quality LED chips integrated into the light source make it brighter than original halogen lamps. significantly increase front and rear side safety and visibility.【Plug and Play】2-in-1 design combines a led board and integrated lens into one unit. It only takes a few minutes to in..
$59.92 $79.89
2'' front led turn signal & running light and rear led brake light with dual contact 1157 base + bracket combo 2'' front led turn signal & running light and rear led brake light with dual contact 1157 base + bracket combo
-40 %
Model: 10274
Features: Advanced Design: To increase lighting performance and lifespan, a built-in heat sink cooling base and a solid billet aluminum base are used. There is no additional wiring needed because the LED turn signals are constructed with 1157 Bullet Style Inserts. The turn signal can now be preci..
$59.99 $99.99
2'' front led turn signal & running light with 1157 base + rear led brake light with 1156 base + bracket combo 2'' front led turn signal & running light with 1157 base + rear led brake light with 1156 base + bracket combo
-40 %
Model: 10261
Features: Advanced Design: To increase lighting performance and lifespan, a built-in heat sink cooling base and a solid billet aluminum base are used. There is no additional wiring needed because the LED turn signals are constructed with 1157 Bullet Style Inserts. The turn signal can now be preci..
$59.99 $99.99
Model: 10126
Key Features: Operating Voltage: DC 10-30V Color Temperature: 6000K Lens Material: PC Waterproof Rate: IP67 Body Color: Black Lumen: H:2800lm, L:2100lm Power: H:40W/Bulb, L: 30W/Bulb Descriptions: New Design Projector Headlight Harley Davidson Dyna Glide Quick Lighting, No Delay S..
$199.99 $199.99
3 1/4" led front turn signal lights & red emark dot rear led turn signals for softail classic flstc and touring models	3 1/4" led front turn signal lights & red emark dot rear led turn signals for softail classic flstc and touring models
New -25 % Out Of Stock
Model: 10056
Upgrade the 3 1/4" LED turn signals on your Harley Davidson! Indeed Plug and Play. Upgrade to LED turn signal lights that are far brighter than the factory bulb. No splicing or wiring is needed. Qualities Diode Technology with Multiple Colors. providing the advantages of increased light production a..
$119.54 $159.39
3-1/4" front emark dot led turn signal indicators with amber & white color for motorcycle 3-1/4" front emark dot led turn signal indicators with amber & white color for motorcycle
-0 % Out Of Stock
Model: 10096
Features: high-powered layout. Invest in genuine Philips chips to prolong their lives and lower their rate of light fade.using an exclusive anti-glare, high transparency lens.Anti-explosion, Simple Installation of Light Resources. The excellent tight waterproof, dustproof, and earthquakeproof per..
$69.99 $69.99
Model: 10230
Features: high-powered layout. Invest in genuine Philips chips to prolong their lives and lower their rate of light fade.using an exclusive anti-glare, high transparency lens.Anti-explosion, Simple Installation of Light Resources. The excellent tight waterproof, dustproof, and earthquakeproof per..
$69.99 $69.99
3.25 inch led brake lights with 1156 base for harley softail & touring models road king 3.25 inch led brake lights with 1156 base for harley softail & touring models road king
-39 %
Model: 10155
You will be more noticeable at night because to the wider-angle red LEDs that each LED brake light emits. Your led tail lights will stand out from the crowd more if you choose the sunny style. resembling an additional spotlight!Key Features: Sunshine Style Design: These lights light up without sa..
$43.73 $71.69
3.25" led combo for harley turn signal lights bulb and rear led brake lights softail road king	3.25" led combo for harley turn signal lights bulb and rear led brake lights softail road king
-25 %
Model: 10236
The road is illuminated at a wider angle by the Bullet Style LED turn signal and brake light on the Harley Softail & Touring Models Road King Road Glide. Your LED tail lights and turn signals will stand out from the crowd if you choose a bullet style. It appears to be a spotlight extra!Features:..
$79.79 $106.39
3.25" led turn signal bulb & running light with 1157 socket for road king softail & touring models 3.25" led turn signal bulb & running light with 1157 socket for road king softail & touring models
-37 %
Model: 10093
  You will be more visible at night because to the wider angles of the white and amber light hues produced by these turn signal light bulbs. Your Harley will stand out from the crowd thanks to its bullet style, which gives it an extra limelight!Key Features: Brighter Than OEM Stock: Available..
$45.16 $71.69
4.5 inch 30w motorcycle  led passing fog light / auxiliary lamp 4.5 inch 30w motorcycle  led passing fog light / auxiliary lamp
-15 %
Model: 10037
Key Features: LED Power: 30W Operating Voltage: DC 9V -32V Waterproof rate: IP68 6 x 5W high intensity LEDs Base Color: Black/Chrome Color Temperature: 6500K Dimensions: 4.5 inch Operating Lumens Output: 1260LM Specifications: LED Power: 30WOperating Voltage: DC 9V -32VWaterproof..
$79.89 $93.99
Showing 1 to 12 of 83 (7 Pages)